Press Equipment Design and Manufacturing
SSD1000-ASF・1500-ASF
Automatic Press with Linear Feed System
Press Machine
・The main components are a die set type press, a feeding device by linear motor, a half-cutter, and a clean roller, making this an automatic machine that precisely punches workpieces using a roll-to-roll method.
・It is mainly used for processing coverlay materials and reinforcement plates related to FPCs, protective and decorative materials for AV audio components, and other applications that require high-speed and high-precision processing.
・This device was developed by our company, which has extensive knowledge of dies, with the aim of maximizing the features and performance of the dies.
| SSD1000-ASF(10ton) | SSD1000-ASF(10ton) | |
|---|---|---|
| Machine Dimensions | 1650mm (H) × 3600mm × 1200mm (excluding signal tower) | |
| Machine Weight | 3500kg | |
| Material Size | Width: Min 118, Max 260, Outer Diameter: 300mm | |
| Maximum Stroke Count | 60 SPM (Conditions: Feed length 120mm, Press stroke 6mm) | |
| Control Power Supply | Operating Circuit: DC24V, Power Circuit: AC200/220V | |
| Safety Device | Light beam safety device During descent: Power OFF, brake activation During stop: Servo OFF, brake activation | |
| Supply Power | Supply Power: 3-phase 200V, 50/60Hz, Voltage fluctuation within ±10% | |
| 10KVa | 20KVa | |
| Supply Air Pressure | 0.5MPa or higher, Dust-proof and moisture-proof | |
| Environmental Conditions | Temperature: 0–30°C, Humidity: 70% or less, No freezing or condensation | |
Download Detailed Documents
(You can download it through the database site “EMIDAS”.
Membership registration on EMIDAS is required for download.)
